LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Charging System - Coupe) >> Generator Assembly >> Removal And Installation >> Removal Service Point >> << A >> Drive Belt (Power Steering, A/C) Removal

<< A >> Drive Belt (Power Steering, A/C) Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen nut "A" for holding the tension pulley.
  2. Loosen bolt "B" for adjustments.
  3. Remove the drive belt.
    Fig 1: Locating Nut "A" and Bolt "B"
    G04537428Courtesy of DAIMLERCHRYSLER CORPORATION
scientia non olet · About LEMON Manuals