LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Charging System - Coupe) >> Generator Assembly >> Disassembly And Assembly >> Disassembly Service Points >> << B >> Generator Pulley Removal

<< B >> Generator Pulley Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Make sure not to damage the rotor.

Set the pulley upward, clamp the rotor in a vise, and remove the pulley.

Fig 1: Removing Generator Pulley
G04537431Courtesy of DAIMLERCHRYSLER CORPORATION