LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Charging System - Coupe) >> Generator Assembly >> Disassembly And Assembly >> Disassembly Service Points >> << A >> Front Bracket Assembly Removal

<< A >> Front Bracket Assembly Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Do not insert a screwdriver too deep. The stator coil will be damaged.

Insert a flat-tipped screwdriver between the front bracket assembly and the stator core, and pry it downward to separate the stator and front bracket assembly.

Fig 1: Inserting Flat-Tipped Screwdriver Between Front Bracket Assembly And Stator Core
G04537430Courtesy of DAIMLERCHRYSLER CORPORATION
scientia non olet · About LEMON Manuals