LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Starting System - Coupe) >> Starter Motor Assembly >> Disassembly And Assembly >> Disassembly Service Points >> << B >> Snap Ring And Stop Ring Removal

<< B >> Snap Ring And Stop Ring Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Press a long socket wrench of appropriate size to the stop ring. Then tap the socket wrench to remove the stop ring to the pinion gear side.
  2. After removing the snap ring (by using snap-ring pliers), remove the stop ring and the overrunning clutch.
    Fig 1: Removing Snap Ring
    G04537402Courtesy of DAIMLERCHRYSLER CORPORATION
scientia non olet · About LEMON Manuals