>> A << O-Ring Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Care must be taken not to permit engine oil or other grease to adhere to the O-ring.
When inserting the pipe, check to be sure that there is no sand, dirt, etc. on its inner surface.

Rinse the mounting location of O-ring and water pipe with water, and install the O-ring and water pipe.

Fig 1: Identifying O-Ring Position

Courtesy of DAIMLERCHRYSLER CORPORATION