LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Engine Cooling System - Coupe) >> Water Hose And Water Pipe >> Removal And Installation >> Installation Service Points >> >> A << O-Ring Installation

>> A << O-Ring Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Do not allow engine oil or other grease to adhere to the O-ring.

Install the O-ring to the water pipe, and coat the outer portion of the O-ring with water or engine coolant.

Fig 1: Identifying O-Ring Position
G04537380Courtesy of DAIMLERCHRYSLER CORPORATION