INSPECTION PROCEDURE 5: Worn or Damaged Clutch Disc Facing: Diagnosis

WARNING: This page is about a different car, the 2005 Dodge Stratus. However, it is still accessible from the selected car via links, so may be relevant.

STEP 1. Check the clutch disc facing for wear and damage.
Q: Is the clutch disc facing worn or damaged?

YES : Replace the clutch disc. Then go to Step 7.

NO: Go to Step 2.
Step 2. Check for oil on the clutch disc facing.
Q: Is there oil on the clutch disc facing?

YES : Replace it. Then go to Step 7.

NO: Go to Step 3.
Step 3. Check the diaphragm spring for uneven height.
Q: Is the diaphragm spring even height?

YES : Go to Step 4.

NO: Replace the clutch cover assembly. Then go to Step 7.
Step 4. Check the torsion spring for weak and damage.
Q: Is the torsion spring worn or damaged?

YES : Replace the clutch disc. Then go to Step 7.

NO: Go to Step 5.
Step 5. Check the pressure plate and flywheel for damage.
Q: Is the pressure plate or flywheel damaged?

YES : Repair the clutch cover assembly or flywheel. Then go to Step 7.

NO: Go to Step 6.
Step 6. Check the mounting for loosening and damage.
Q: Is the mounting loosened or damaged?

YES : Tighten or replace the mounting. Then go to Step 7.

NO: Go to Step 7.
Step 7. Check the symptom.
Q: Is the symptom reproduced?

YES : Return to Step 1.

NO: The procedure is complete.