INSPECTION PROCEDURE 1: Clutch Slips: Diagnosis

WARNING: This page is about a different car, the 2005 Dodge Stratus. However, it is still accessible from the selected car via links, so may be relevant.

STEP 1. Check insufficient clutch pedal play.
Refer to ON-VEHICLE SERVICE .

Q: Does the clutch pedal play meet the standard value?

YES : Go to Step 2.

NO: Adjust the clutch pedal play. Then go to Step 7.
Step 2. Check the clutch disc facing for excessive wear.
Q: Is the clutch disc facing worn excessively?

YES : Replace the clutch pedal disc. Then go to Step 7.

NO: Go to Step 3.
Step 3. Check the clutch disc facing for hardening and adhesion of oil.
Q: Is the clutch disc facing hardened or contaminated with oil?

YES : Replace the clutch pedal disc. Then go to Step 7.

NO: Go to Step 4.
Step 4. Check the clutch release fork for catching.
Q: Is the clutch release fork stuck?

YES : Repair or replace the clutch release fork. Then go to Step 7.

NO: Go to Step 5.
Step 5. Check the diaphragm spring for weakness and damage.
Q: Is the diaphragm spring weaken or damaged?

YES : Replace the clutch cover assembly. Then go to Step 7.

NO: Go to Step 6.
Step 6. Check the hydraulic system for clogging.
Q: Is the hydraulic system clogged?

YES : Repair or replace the hydraulic system. Then go to Step 7.

NO: Go to Step 7.
Step 7. Check the symptom.
Q: Is the symptom reproduced?

YES : Return to Step 1.

NO: The procedure is complete.