LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Clutch On-Vehicle Service - Coupe) >> Clutch Control >> Disassembly And Assembly >> Assembly Service Point >> >> A << Damper And Push Rod Installation

>> A << Damper And Push Rod Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus. However, it is still accessible from the selected car via links, so may be relevant.

Set the length of the push rod assembly to the shown dimension to make the adjustment of the clutch pedal easier.

Fig 1: Identifying Damper And Push Rod Dimension
G04537315Courtesy of DAIMLERCHRYSLER CORPORATION