INSPECTION PROCEDURE 1: Brake Drag: Diagnosis
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
- STEP 1. Check the incomplete release of parking brake.
Q: Is there a fault?
YES : Correct it. Then go to Step 5.
NO: Go to Step 2.
- STEP 2. Check the incorrect parking break adjustment. (Refer to ON-VEHICLE SERVICE .)
Q: Is there a fault?
YES : Adjust it. Then go to Step 5.
NO: Go to Step 3.
- STEP 3. Check the parking break cable routing condition.
Q: Is there a fault?
YES : Correct it. Then go to Step 5.
NO: Go to Step 4.
- STEP 4. Check the rear brake's shoe and lining. (Refer to INSPECTION .)
Q: Is there a fault?
YES : Correct it. Then go to Step 5.
NO: Go to Step 5.
- STEP 5. Check symptom.
Q: Is the malfunction eliminated?
YES : Diagnosis is complete.
NO: Recheck from Step 1.