LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Parking Brake (Coupe)) >> Parking Brake Cable >> Removal And Installation >> Installation Service Points >> >> B << Shoe-To-Anchor Spring Installation

>> B << Shoe-To-Anchor Spring Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: The load on the respective shoe-to-anchor springs is different, so the rear side spring in the figure has been painted.

Install the shoe-to-anchor springs in the order shown in the illustration.

Fig 1: Installing Shoe-To-Anchor Springs (1 Of 2)
G04537298Courtesy of DAIMLERCHRYSLER CORPORATION
Fig 2: Installing Shoe-To-Anchor Springs (2 Of 2)
G04537299Courtesy of DAIMLERCHRYSLER CORPORATION