Valve Body: Installation
WARNING: This page is about a different car, the 2002 Dodge Stratus, 2002 Chrysler Sebring, and 2002 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
- To install, reverse removal procedure. Ensure roller on park sprag rod engages with park sprag guide bracket. Install valve body/transfer plate-to-transaxle case bolts in original location. Tighten bolts to specification. See TORQUE SPECIFICATIONS .
- Install NEW oil filter and NEW "O" ring. Apply RTV sealant on oil pan-to-transaxle surface and below head of oil pan bolts before installing. Install and tighten oil pan bolts to specification.
- Install shift lever on manual shaft assembly. Reconnect shift linkage or cable. Fill transaxle with appropriate fluid to proper level. See LUBRICATION .