LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Front Axle - Coupe) >> Drive Shaft Assembly >> Disassembly And Assembly >> Assembly Service Points >> >> B << Spider Assembly Installation

>> B << Spider Assembly Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: The driveshaft joint uses special grease. Do not mix old, new or different types of grease.
  1. Apply the repair kit grease to the spider axles and rollers of the spider assembly.
  2. Face the chamfered portion of the spider assembly's spline toward the driveshaft, and then install the spider assembly to the driveshaft.
    Fig 1: Applying Repair Kit Grease To Spider Axles And Rollers Of Spider Assembly
    G04537020Courtesy of DAIMLERCHRYSLER CORPORATION
scientia non olet · About LEMON Manuals