LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Front Suspension - Coupe) >> Lower Arm >> Removal And Installation >> Installation Service Point >> >> A << Lower Arm Clamp Installation

>> A << Lower Arm Clamp Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. The arrow mark on the clamp should point as shown in illustration.
    Fig 1: Identifying Arrow Mark On Clamp
    G04536937Courtesy of DAIMLERCHRYSLER CORPORATION
  2. Install the clamp into the shaft at the angle shown in the illustration.
    Fig 2: Installing Clamp Into Shaft
    G04536938Courtesy of DAIMLERCHRYSLER CORPORATION