LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (3.0L Engine - On-Vehicle Service - Coupe) >> Timing Belt >> Removal And Installation >> Installation Service Points >> >> C << Engine Support Bracket, Right Installation

>> C << Engine Support Bracket, Right Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

Tighten the right engine support bracket mounting bolts in the order shown in the illustration.

Fig 1: Tightening Right Engine Support Bracket Mounting Bolts
G04538400Courtesy of DAIMLERCHRYSLER CORPORATION
scientia non olet · About LEMON Manuals