LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (3.0L Engine - On-Vehicle Service - Coupe) >> Specifications >> Service Specifications

Service Specifications

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
SERVICE SPECIFICATIONS

ITEMS STANDARD VALUE LIMIT
Basic ignition timing at idle 5° BTDC +/- 3° -
Actual ignition timing at idle Approximately 15° BTDC -
CO content % 0.5 or less -
HC contents ppm 100 or less -
Curb idle speed r/min 700 +/- 100 -
Compression pressure (250 - 400 r/min) kPa (psi) 824 (119) Minimum 575 (83)
Compression pressure difference of all cylinder kPa (psi) - 98 (14)
Intake manifold vacuum at curb idle kPa (in Hg) - Minimum 60 (18)
Auto-tensioner pushrod movement mm (in) Within 1.0 (0.04) -
Auto-tensioner rod protrusion mm (in) 3.8 - 5.0 (0.15 - 0.20) -