LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (3.0L Engine - On-Vehicle Service - Coupe) >> Oil Pan >> Removal And Installation >> Installation Service Points >> >> A << Upper Oil Pan Installation

>> A << Upper Oil Pan Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: The bolt holes for bolts 13 and 14 in the illustration are cut away on the transaxle side. Be careful not to insert these bolts at an angle.

Tighten the oil pan, upper mounting bolts in the order shown.

Fig 1: Tightening Oil Pan, Upper Mounting Bolts
G04538375Courtesy of DAIMLERCHRYSLER CORPORATION