>> D << Fuel High-Pressure Hose Installation
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Do not allow engine oil to enter the fuel rail.
- Apply a small amount of new engine oil to the O-ring.
- Turning the fuel high-pressure hose to the right and left, install it to the fuel rail, while being careful not to damage the O-ring. After installing, check that the hose turns smoothly.
- If the hose does not turn smoothly, the O-ring may be clamped. Disconnect the fuel high-pressure hose and check the O-ring for damage.
- Re-insert the fuel rail and check that the hose turns smoothly.