LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (3.0L Engine - On-Vehicle Service - Coupe) >> Cylinder Head Gasket >> Removal And Installation >> Installation Service Points >> >> A << Cylinder Head Gasket Installation

>> A << Cylinder Head Gasket Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Wipe off all oil and grease from the gasket mounting surface.
  2. Match the shapes of the cylinder head holes with their respective cylinder head gasket holes.
scientia non olet · About LEMON Manuals