LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (3.0L Engine - On-Vehicle Service - Coupe) >> Crankshaft Rear Oil Seal >> Removal And Installation >> Installation Service Points >> >> B << Drive Plate < A/T >/Flywheel < M/T >/Adapter Plate/Plate < M/T > Installation

>> B << Drive Plate < A/T >/Flywheel < M/T >/Adapter Plate/Plate < M/T > Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

Use special tool MD998781 to hold the flywheel or drive plate in the same manner as removal. Then install the bolts.

Fig 1: Securing Flywheel Or Drive Plate
G04538385Courtesy of DAIMLERCHRYSLER CORPORATION
scientia non olet · About LEMON Manuals