LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (3.0L Engine - On-Vehicle Service - Coupe) >> Crankshaft Front Oil Seal >> Removal And Installation >> Installation Service Points >> >> B << Crankshaft Spacer/Crankshaft Sensing Blade/Crankshaft Sprocket Installation

>> B << Crankshaft Spacer/Crankshaft Sensing Blade/Crankshaft Sprocket Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

To prevent the crankshaft pulley mounting bolt from loosening, degrees or clean the crankshaft, the crankshaft spacer, the crankshaft sensing blade and the crankshaft at the shown positions.

Fig 1: Installing Crankshaft Sensing Blade And Crankshaft
G04538380Courtesy of DAIMLERCHRYSLER CORPORATION
scientia non olet · About LEMON Manuals