LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (3.0L Engine - On-Vehicle Service - Coupe) >> Crankshaft Front Oil Seal >> Removal And Installation >> Installation Service Points >> >> A << Crankshaft Front Oil Seal Installation

>> A << Crankshaft Front Oil Seal Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply a small amount of engine oil to the oil seal lip and then insert.
  2. Using special tool MD998717, tap the oil seal into the front case.
    Fig 1: Applying Engine Oil To Oil Seal Lip
    G04538379Courtesy of DAIMLERCHRYSLER CORPORATION