LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (2.4L Engine - On-Vehicle Service - Coupe) >> Engine Assembly >> Removal And Installation >> Removal Service Points >> << A >> Power Steering Oil Pump And Bracket Assembly Removal

<< A >> Power Steering Oil Pump And Bracket Assembly Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

Remove the power steering oil pump and bracket assembly from the engine with the hose attached.

NOTE: Place the removed power steering oil pump and bracket assembly in a place where it will not be a hindrance when removing and installing the engine assembly, and secure it with a cord or wire.
scientia non olet · About LEMON Manuals