LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Lubrication & Maintenance- Coupe) >> Maintenance Service >> 22. SRS Air Bag (Inspect System) >> Front Seatback Assembly With Side-Airbag Module >> Wiring Harness

Wiring Harness

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Instrument Panel Wiring Harness
G04536912Courtesy of DAIMLERCHRYSLER CORPORATION
  1. Check the connector for poor connection.
    WARNING: The SRS system may not operate if SRS harnesses or connectors are damaged or improperly connected, which could result in serious injury or death to the vehicle's driver and front passenger.
  2. Check the harness for binding, the connectors for damage, and the terminals for deformation.

    REPLACE ANY CONNECTORS OR HARNESS THAT FAIL THE VISUAL INSPECTION. (Refer to , SRS SERVICE PRECAUTIONS .)