Using Scan Tool MB991502
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
Required Special Tool:
- MB991502: Scan Tool (MUT-II)
CAUTION:
To prevent damage to scan tool MB991502, always turn the ignition switch to the "LOCK" (OFF) position before connecting or disconnecting the scan tool MB991502.
- Connect scan tool MB991502 to the data link connector.
- Turn the ignition switch to the "ON" position.
- Use scan tool MB991502 to check for SRS diagnostic trouble codes.
- Turn the ignition switch to the "LOCK" (OFF) position.
- Disconnect scan tool MB991502.