LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Air Bag Restraint Systems - Coupe) >> Air Bag Modules And Clock Spring >> Removal And Installation >> Notes

Removal And Installation: Notes

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
  • Never attempt to disassemble or repair the air bag modules or the clock spring. If faulty, replace the part.
  • Do not drop the air bag modules or the clock spring or allow contact with water, grease or oil. Replace it if a dent, crack, deformation or rust is detected.
  • The air bag modules should be stored on a flat surface with the pad cover facing upward. Do not place anything on top of it.
  • Do not expose the air bag modules to temperatures over 93°C (200°F).
  • After deployment of an air bag, replace the clock spring with a new one.
  • Wear gloves and safety glasses when handling air bags that have already deployed.
  • An undeployed air bag module should only be disposed of in accordance with the procedures (Refer to INSPECTION  ).
scientia non olet · About LEMON Manuals