LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Introduction - Coupe) >> Precautions Before Service >> How To Perform Vehicle Identification Number (VIN) Writing >> Writing Procedure

Writing Procedure

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect scan tool to the data link connector.
  2. Turn the ignition switch to the "ON" position.
  3. Confirm DTC No. P0630 (EEPROM malfunction) is not shown.
    NOTE: When DTC No. P0630 (EEPROM malfunction) is shown, the VIN cannot be stored even if entered. Therefore, the troubleshooting is performed when this DTC is shown.
  4. Select "Coding" form the menu screen.
  5. Select "VIN writing" form the menu screen.
  6. Enter the VIN.
  7. After entry of the VIN, turn the ignition switch to the "LOCK" (OFF) position. After ten seconds or more passed, turn to the "ON" position again.
  8. Confirm DTC No. P0630 (VIN malfunction) is not shown.
    NOTE: When DTC No. P0630 (VIN malfunction) is shown, enter the VIN again because that would be not appropriate.
scientia non olet · About LEMON Manuals