LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Introduction - Coupe) >> How To Use Troubleshooting/Inspection Service Points >> If Inspecting With The Connector Disconnected < When Inspecting A Male Pin >

If Inspecting With The Connector Disconnected < When Inspecting A Male Pin >

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: At this time, be careful not to short the connector pins with the test probes. Doing so may damage the circuits inside the ECU.

Touch the pin directly with the test probe.

Fig 1: Touching Pin Directly With Test Probe
G04536829Courtesy of DAIMLERCHRYSLER CORPORATION