Diagnostic Procedure
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
BCM MESSAGES NOT RECEIVED SYMPTOM CHART
| TEST | ACTION | APPLICABILITY |
|---|---|---|
| 1 | Turn the ignition on. With the DRBIII®, attempt to communicate with the Body Control Module. Was the DRBIII® able to I/D or communicate with the BCM? Yes --> Go To 2 No --> Refer to the COMMUNICATION CATEGORY for the related symptom(s). Perform BODY VERIFICATION TEST - VER 1 . |
All |
| 2 | With the DRBIII®, erase DTC's. Cycle the ignition switch from off to on and wait approximately 1 minute. With the DRBIII®, read DTC's. Did this DTC reset? Yes --> Replace the Body Control Module in accordance with the service information. Perform BODY VERIFICATION TEST - VER 1 . No --> Test Complete. |
All |