Following A Repair (ATC & MTC)

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

Calibrate HVAC Door Actuators

The electric door actuators (blend, mode, recirculation) must be calibrated after making any repairs to the HVAC system.
- To calibrate the door actuators, either disconnect the battery or remove JB Fuse #5 for five minutes, or using the DRBIII®, select Body, Body Computer, Miscellaneous, and Calibrate HVAC Door Motors.