LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Body Diagnostic Procedures - Except Coupe) >> System Description And Functional Operation >> Electrically Heated Systems >> Heated Seat Relay

Heated Seat Relay

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

The Heated Seat System supply voltage is controlled through the Heated Seat Relay located in the Power Distribution Center (PDC). The relay coil is controlled by the Body Control Module (BCM) and is energized whenever the ignition key is in the on position. If low battery voltage is sensed by the Powertrain Control Module, a PCI bus message will be sent to the BCM to turn off the Heated Seat Relay.

scientia non olet · About LEMON Manuals