Compass/Mini-Trip Computer: Operation
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
Actuation of the STEP button will cause the CMTC to change modes of operation. Actuation of the US/M button will toggle the display between English and Metric units. Trip Computer resets are accomplished by pressing the STEP and US/M buttons simultaneously. To reset only the trip information currently being displayed, press and release the STEP and US/M buttons simultaneously for one second until the chime sounds. To reset all trip information, press and hold the STEP and US/M buttons simultaneously until a second chime sounds (approximately 2 seconds) and then release the buttons.
The CMTC operates only when the ignition is on.
The following functions are available using the STEP button:
- Compass and outside temperature
- Average fuel economy (AVE ECO)
- Distance to Empty (DTE)
- Trip Odometer (ODO)
- Elapsed ignition time (ET)
- Display Off