Diagnostic Procedure
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSTIC PROCEDURE - VTSS DOES NOT TRIP FROM DRIVER DOOR
| TEST | ACTION | APPLICABILITY |
|---|---|---|
| 1 | A failure in the Horn Relay Control circuit, Horn Relay Output circuit, or the Door Ajar circuits could cause this failure. The Horn Relay Control circuit will be diagnosed first. Continue to the Horn Functional Test for further diagnosis. Horn Functional Test. Go To 2 |
All |
| 2 | With the DRBIII®, actuate the HORN RELAY. Do the Horns sound while actuating the Horn Relay. Yes --> Go To 3 No --> Refer to HORNS FAIL TO SOUND . |
All |
| 3 | With the DRBIII®, in Inputs/Outputs, read the following Door/Decklid Ajar Switch states. DRV DR AJAR SW PAS DR AJAR SW LR DR AJAR SW (4 Door) RR DR AJAR SW (4 Door) DECKLID AJAR SW Do the Door/Decklid Ajar Switch states appear correct? Yes --> Replace the Body Control Module. Perform VTSS VERIFICATION TEST - 1A . No --> Refer to the appropriate DOOR AJAR TEST in DOOR AJAR. |
All |