Diagnostic Procedure
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSTIC PROCEDURE - ONE DOOR FAILS TO LOCK AND UNLOCK FROM ANY SWITCH
| TEST | ACTION | APPLICABILITY |
|---|---|---|
| 1 | Turn the ignition off. Disconnect the Body Control Module C4 connector. Measure the resistance between ground and the Driver Unlock Relay Output circuit in the Body Control Module C4 connector Is the resistance below 100.0 ohm? No --> Replace the Body Control Module in accordance with the Service Information. Perform BODY VERIFICATION TEST - VER 1 . Yes --> Repair the Driver Unlock Relay Output circuit for a short to ground. Perform BODY VERIFICATION TEST - VER 1 . |
All |