Diagnostic Procedure
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSTIC PROCEDURE - DRIVER DOOR FAILS TO UNLOCK FROM ANY SWITCH
| TEST | ACTION | APPLICABILITY |
|---|---|---|
| 1 | Disconnect the Body Control Module C4 connector. Measure the resistance between ground and the Driver Lock Relay Output circuit. Is the resistance below 100.0 ohms? Yes --> Repair the Driver Lock Relay Output circuit for a short to ground. Perform BODY VERIFICATION TEST - VER 1 . No --> Replace the Body Control Module - Driver Unlock Relay Ground open. Perform BODY VERIFICATION TEST - VER 1 . |
All |