Section 109 (MULTIPORT Fuel Injection (MFI) 3.0L - DTCS P0181 To P0431 - Coupe)

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

DTC P0181: Fuel Tank Temperature Sensor Circuit Range/Performance
- Notes
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0182: Fuel Tank Temperature Sensor Circuit Low Input
- Notes
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0183: Fuel Tank Temperature Sensor Circuit High Input
- Notes
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0201: Injector Circuit Malfunction - Cylinder 1
- Notes
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0202: Injector Circuit-Cylinder 2
- Notes
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0203: Injector Circuit Malfunction - Cylinder 3
- Notes
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0204: Injector Circuit Malfunction - Cylinder 4
- Notes
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0205: Injector Circuit Malfunction - Cylinder 5
- Notes
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0206: Injector Circuit Malfunction - Cylinder 6
- Notes
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0300: Random/Multiple Cylinder Misfire Detected
- Random Misfire Circuit
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0301: Cylinder 1 Misfire Detected
- Misfire Detected Circuit
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0302: Cylinder 2 Misfire Detected
- Misfire Detected Circuit
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0303: Cylinder 3 Misfire Detected
- Misfire Detected Circuit
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0304: Cylinder 4 Misfire Detected
- Misfire Detected Circuit
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0305: Cylinder 5 Misfire Detected
- Misfire Detected Circuit
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0306: Cylinder 6 Misfire Detected
- Misfire Detected Circuit
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0325: Knock Sensor Circuit
- Notes
- Circuit Operation
- Technical Description
- DTC Set Conditions
  - Check Conditions
  - Judgment Criteria
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0335: Crankshaft Position Sensor Circuit
- Notes
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
- DTC SET CONDITIONS < Range/Performance problem - alignment >
- DTC SET CONDITIONS < Circuit continuity >
  - Logic Flow Chart
  - Check Conditions, Judgment Criteria
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0340: Camshaft Position Sensor Circuit
- Notes
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
- DTC SET CONDITIONS < Range/Performance problem - alignment >
- DTC SET CONDITIONS < Circuit - continuity >
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0401: Exhaust Gas Recirculation Flow Insufficient Detected
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0403: Exhaust Gas Recirculation Control Circuit
- Notes
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0421: Warm Up Catalyst Efficiency Below Threshold (bank 1)
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0431: Warm Up Catalyst Efficiency Below Threshold (bank 2)
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis