Section 108 (MULTIPORT Fuel Injection (MFI) 3.0L - DTCS P0130 To P0175 - Coupe)

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

DTC P0130: Heated Oxygen Sensor Circuit (bank 1, sensor 1)
- Notes
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0131: Heated Oxygen Sensor Circuit Low Voltage (bank 1, sensor 1)
- Notes
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0132: Heated Oxygen Sensor Circuit High Voltage (bank 1, sensor 1)
- Notes
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0133: Heated Oxygen Sensor Circuit Slow Response (bank 1, sensor 1)
- Notes
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0134: Heated Oxygen Sensor Circuit No Activity Detected (bank 1, sensor 1)
- Heated Oxygen Sensor Circuit No Activity Detected (Bank 1, Sensor 1) Circuit
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0135: Heated Oxygen Sensor Heater Circuit (bank 1, sensor 1)
- Notes
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0136: Heated Oxygen Sensor Circuit (bank 1, sensor 2)
- Notes
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0137: Heated Oxygen Sensor Circuit Low Voltage (bank 1, sensor 2)
- Notes
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0138: Heated Oxygen Sensor Circuit High Voltage (bank 1, sensor 2)
- Notes
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0139: Heated Oxygen Sensor Circuit Slow Response (bank 1, sensor 2)
- Notes
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0141: Heated Oxygen Sensor Heater Circuit (bank 1, sensor 2)
- Notes
- Circuit Operation
- Background
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0150: Heated Oxygen Sensor Circuit (bank 2, sensor 1)
- Notes
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0151: Heated Oxygen Sensor Circuit Low Voltage (bank 2, sensor 1)
- Notes
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0152: Heated Oxygen Sensor Circuit High Voltage (bank 2, sensor 1)
- Notes
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0153: Heated Oxygen Sensor Circuit Slow Response (bank 2, sensor 1)
- Notes
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0154: Heated Oxygen Sensor No Activity Detected (bank 2, sensor 1)
- Heated Oxygen Sensor Circuit No Activity Detected (Bank 2, Sensor 1) Circuit
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0155: Heated Oxygen Sensor Heater Circuit (bank 2, sensor 1)
- Notes
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0156: Heated Oxygen Sensor Circuit High Voltage (bank 2, sensor 2)
- Notes
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0157: Heated Oxygen Sensor Circuit Low Voltage (bank 2, sensor 2)
- Notes
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0158: Heated Oxygen Sensor Circuit High Voltage (bank 2, sensor 2)
- Notes
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0159: Heated Oxygen Sensor Circuit Slow Response (bank 2, sensor 2)
- Notes
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0161: Heated Oxygen Sensor Heater Circuit (bank 2, sensor 2)
- Notes
- Circuit Operation
- Background
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0171: System too Lean (bank 1)
- System too Lean (bank 1) Circuit
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0172: System too Rich (bank 1)
- System too Rich (bank 1) Circuit
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0174: System too Lean (bank 2)
- System too Lean (bank 2) Circuit
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0175: System too Rich (bank 2)
- System too Rich (bank 2) Circuit
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis