LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Fuel System - Except Coupe) >> Fuel Injection >> Crankshaft Position Sensor >> Removal >> Removal - 4 Cylinder

Removal - 4 Cylinder

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Raise vehicle and support.
  3. Disconnect the electrical connector (Figure).
  4. Remove crankshaft sensor bolt.
  5. Remove the crankshaft sensor.
scientia non olet · About LEMON Manuals