LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Fuel System - Except Coupe) >> Fuel Injection >> Crankshaft Position Sensor >> Removal >> Removal - 2.7L

Removal - 2.7L

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the air cleaner box.
  3. Disconnect the electrical connector from Crank shaft position sensor (Fig 1).
    Fig 1: Crankshaft Sensor 2.7L
    G02327984Courtesy of DAIMLERCHRYSLER CORPORATION
  4. Remove bolt.
  5. Remove sensor.
scientia non olet · About LEMON Manuals