Accelerator Pedal: Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

Hold the throttle body throttle lever in the wide open position. Remove the throttle cable from the throttle body cam (Fig 1).

Fig 1: Throttle Cable Release
Courtesy of DAIMLERCHRYSLER CORPORATION
From inside the vehicle, hold up the pedal and remove the pedal retainer and throttle cable from the upper end of the pedal lever (Fig 2).
Remove nuts from accelerator pedal attaching studs. Remove assembly from vehicle (Fig 3).

Fig 2: Cable Clip
Courtesy of DAIMLERCHRYSLER CORPORATION

Fig 3: Accelerator Pedal
Courtesy of DAIMLERCHRYSLER CORPORATION