LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Fuel System - Except Coupe) >> Fuel Delivery >> Fuel Tank Filler Tube >> Installation

Fuel Tank Filler Tube: Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install filler neck to filler hose.
  2. Connect the fuel filler vent tube.
  3. Raise fuel tank into position.
  4. Install fuel tank straps and tighten bolts to 54 N.m (39.8 ft. lbs).
  5. Remove the transmission jack.
  6. Tighten clamps 3.6 N.m (31.8 in. lbs.).
  7. Install ground strap 8.4 N.m (75 in. lbs.).
  8. Lower vehicle.
  9. Install 3 screws to filler neck and quarter panel (Figure) 2.3 N.m (21 in. lbs.).
  10. Fill tank and check for leaks.
  11. Connect negative cable from battery.
scientia non olet · About LEMON Manuals