LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Power Door Locks - Except Coupe) >> Door Lock / Unlock Switch >> Installation

Door Lock / Unlock Switch: Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the switch by snapping into place.
  2. Connect switch wire connector.
  3. Install the door trim panel (Refer to BODY/DOOR - FRONT/TRIM PANEL - INSTALLATION) .
  4. Connect the battery negative remote cable.