Door Lock Switch
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
Remove the switch from its mounting location. Using an ohmmeter, refer to DOOR LOCK SWITCH CONTINUITY table to determine if the continuity is correct in the LOCK and UNLOCK switch positions. If these results are not obtained, replace the switch.
DOOR LOCK SWITCH CONTINUITY
|
SWITCH POSITION |
CONTINUITY BETWEEN |
RESISTANCE VALUE |
| LOCK | 1 AND 4 | 2700 ohm +/- 10% |
| UNLOCK | 1 AND 4 | 620 ohm +/- 10% |