LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Power Door Locks - Except Coupe) >> Door Cylinder Lock Switch >> Installation

Door Cylinder Lock Switch: Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the Door Cylinder Lock Switch onto the door lock cylinder.
  2. Connect the wiring clip and pigtail wire connector.
  3. Install door trim panel (Refer to BODY/DOOR - FRONT/TRIM PANEL - INSTALLATION) .
  4. Connect the battery negative cable.
scientia non olet · About LEMON Manuals