LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Power Door Locks - Except Coupe) >> DECKLID Release Switch >> Installation

DECKLID Release Switch: Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the decklid release switch over opening of the left lower instrument panel trim, and push switch through opening.
  2. Connect the wire connector.
  3. Install the left lower instrument panel cover.
  4. Connect the battery negative cable.
scientia non olet · About LEMON Manuals