LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Power Door Locks - Except Coupe) >> DECKLID Release Solenoid >> Installation

DECKLID Release Solenoid: Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the latch and motor assembly. Install the two retaining nuts.
  2. Install latch cover and push pins.
  3. Close the deck lid.
  4. Connect the negative battery cable remote terminal to the remote battery post.