LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 100 (Heated Seat System - Except Coupe) >> Heated Seat Switch >> Removal

Heated Seat Switch: Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the battery negative cable.
  2. Remove the center console. Refer to INTERIOR/EXTERIOR - EXCEPT COUPE for the procedure.
  3. Disconnect the center console wire harness connector from the connector receptacle on the back of the heated seat switch.
  4. Remove the heated seat switch by depressing the retaining tabs and pushing straight out of the center console.
scientia non olet · About LEMON Manuals