Heated Seat Switch: Description
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - REAR AND FRONT VIEW OF HEATED SEAT SWITCH |
The heated seat switch used on vehicles with this option is mounted in the center console. The switch is snapped into a mounting hole in a center console trim panel. The heated seat switch incorporates two rotary knobs, one for the driver and one for the front seat passenger. See Fig 1. These knobs have numerals 0-6 to indicate the desired rate of supplemental seat heating. The instrument panel wire harness connectors for the heated seat switch is keyed to match the connector receptacle on the switch so that the heated seat switch can only be connected in the proper orientation.
The heated seat switch cannot be repaired. If the indicator or back lighting lamps are faulty or damaged, the individual heated seat switch unit must be replaced.