LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 100 (Heated Seat System - Except Coupe) >> Heated Seat Element >> Diagnosis And Testing - Heated Seat Element >> Seat Back

Seat Back

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the battery negative cable. Disconnect the green 2-way heated seat back wire harness connector. Using an ohmmeter, check the resistance between the two pins. There should be continuity. If OK, test the heated seat control module as described in ELECTRONIC CONTROL MODULES - EXCEPT COUPE . If not OK, replace the faulty seat back cover and element assembly.
scientia non olet · About LEMON Manuals