2.7L V6 Engine - VIN U: Lubrication: Operation

Oil from the oil pan is pumped by a gerotor type oil pump directly coupled to the crankshaft. Oil pressure is controlled by a relief valve mounted inside the oil pump housing.

Fig 1: Identifying Cylinder Block Oil Lubrication System

Courtesy of CHRYSLER CORP.

Fig 2: Identifying Oil Flow (1 of 3)

Courtesy of CHRYSLER CORP.

Fig 3: Identifying Oil Flow (2 of 3)

Courtesy of CHRYSLER CORP.

Fig 4: Identifying Oil Flow (3 of 3)

Courtesy of CHRYSLER CORP.

Fig 5: Identifying Cylinder Head Left Side Oil Lubrication System

Courtesy of CHRYSLER CORP.

Fig 6: Identifying Cylinder Head Right Side Oil Lubrication System

Courtesy of CHRYSLER CORP.